Non-woven fabric used for the production of shoes

The material with code S 2/... is a non-woven fabric, fastened with needle-punched method. The material is compacted.

The material with code S 3/... is a non-woven fabric, fastened with needle-punched method and thermobonded.

The material with code S 4/... is a non-woven nappy fabric. Material marked “A” does not have thermobonding and is more stretched, which has its advantages when tuning car interiors.

The material with code S 8/... is a non-woven fabric, fastened with needle-punched method and calendered on both sides.

The material with code S 9/... is a non-woven fabric, fastened with needle-punched method and calendered on one sides.

The material with code S 13/... is a non-woven fabric, fastened with needle-punched method.

The material with code IF... is a non-woven fabric, fastened with needle-punched method and, depending on the purpose of the material, can be additionally thermobonded.

The material with code SP... is a non-woven needle-punched fabric with a continuous impregnation of the polymer composition. The material under normal conditions is hard, when heated to 100-130° C softens and can be molded.

The material with code SA 2/..., SA 3/... is a non-woven needle-punched fabric with one-sided impregnation with the polymer composition.

The material with code SA 7/... is a nonwoven needle-punched fabric reinforced with a woven frame with a one-sided impregnation by a polymer composition.

1.1. Nonwoven material used for lining in shoes

#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
1.	S 3/1	Black	200 ± 20	1,5 ± 0,2	150 ± 2	PL-100%
2.	S 3/2	Black	250 ± 25	1,6 ± 0,2	150 ± 2	PL-100%
3.	S 3/3	Black	300 ± 25	1,8 ± 0,2	150 ± 2	PL-100%
4.	S 3/3 VI	Grey	280 ± 25	1,7 ± 0,2	150 ± 2	PL-100%
5.	S 3/4	Black	350 ± 25	1,9 ± 0,2	150 ± 2	PL-100%
6.	S 3/6	Black	400 ± 30	2,1 ± 0,2	150 ± 2	PL-100%
7.	S 8/2 VISH-80	Grey	250 ± 25	1,8 ± 0,2	150 ± 2	WO-80%, PL-20%
8.	S 8/3 VISH-80	Grey	300 ± 25	2,0 ± 0,2	150 ± 2	WO-80%, PL-20%
9.	S 8/3 TSH-80	Dark-Grey	300 ± 25	2,0 ± 0,2	150 ± 2	WO-80%, PL-20%
10.	S 3/1 LM	Dark-Grey	200 ± 20	1,5 ± 0,2	150 ± 2	PL-100%
11.	S 3/3 LM	Dark-Grey	260 ± 25	1,8 ± 0,2	150 ± 2	PL-100%
12.	S 3/3 L	Grey	300 ± 25	2,0 ± 0,2	150 ± 2	PL-100%
13.	S 3/3 BL	White	300 ± 25	2,0 ± 0,2	150 ± 2	PL-100%
14.	S 3/4 L	Grey	350 ± 25	2,1 ± 0,2	150 ± 2	PL-100%
15.	S 2/1	Black	200 ± 25	1,6 ± 0,2	160± 2	PL-100%
16.	S 2/2	Black	250 ± 25	1,8 ± 0,2	160± 2	PL-100%
17.	S 2/3	Black	300 ± 25	2,0 ± 0,2	160± 2	PL-100%
18.	S 2/4	Black	350 ± 25	2,1 ± 0,2	160 ± 2	PL-100%
19.	S 2/1 VI	Grey	200 ± 20	1,6 ± 0,2	160 ± 2	PL-100%
20.	S 2/2 VI	Grey	240 ± 25	1,8 ± 0,2	160 ± 2	PL-100%
21.	S 2/3 VI	Grey	280 ± 25	1,9 ± 0,2	160 ± 2	PL-100%
22.	S 2/1 VISH-20	Grey	200 ± 25	2,0 ± 0,2	160 ± 2	WO-20%, PL-80%
23.	S 2/1 VISH-30	Grey	200 ± 25	2,0 ± 0,2	160 ± 2	WO-30%, PL-70%
24.	S 2/1 VISH-80	Grey	200 ± 25	2,2 ± 0,2	160± 2	WO-80%, PL-20%
25.	S 2/2 VISH-80	Grey	250 ± 25	2,4 ± 0,2	160± 2	WO-80%, PL-20%
26.	S 2/2 TSH-60	Dark-Grey	250 ± 25	2,3 ± 0,2	160 ± 2	WO-60%, PL-40%
27.	S 2/2 SSH-80	Light-Brown	250 ± 25	2,4 ± 0,2	160 ± 2	WO-80%, PL-20%
28.	S 2/3 VISH-80	Grey	300 ± 25	2,6 ± 0,2	160 ± 2	WO-80%, PL-20%
29.	S 2/3 SH-50	Brown	300 ± 25	2,5 ± 0,2	160 ± 2	WO-50%, PL-50%
30.	S 133/4О	Grey	350 ± 25	2,8 ± 0,2	150 ± 2	PL-100%
31.	S 133/4 T	Dark-Grey	350 ± 25	2,8 ± 0,2	150 ± 2	PL-100%
32.	S 133/6О	Grey	400 ± 25	3,0 ± 0,2	150 ± 2	PL-100%

1.2. Nappy non-woven material used for lining in modeling and casual shoes

#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
1.	S 4/1351	Black	220 ± 20	1,8 ± 0,2	150 ± 2	PL-100%
2.	S 4/1351 L	Black	220 ± 20	1,8 ± 0,2	150 ± 2	PL-100%
3.	S 4/1841 A	Black	220 ± 20	2,0 ± 0,2	150 ± 2	PL-100%
4.	S 4/2351	Black	260 ± 20	2,0 ± 0,2	150 ± 2	PL-100%
5.	S 4/2351 L	Black	260 ± 20	2,0 ± 0,2	150 ± 2	PL-100%
6.	S 4/3351	Black	300 ± 30	2,2 ± 0,2	150 ± 2	PL-100%
7.	S 4/3351 L	Black	300 ± 25	2,2 ± 0,2	150 ± 2	PL-20%
8.	S 4/2353 L	Dark-Grey	260 ± 20	2,0 ± 0,2	150 ± 2	PL-20%
9.	S 4/2357 L	Light-Grey	260 ± 20	2,0 ± 0,2	150 ± 2	PL-20%
10.	S 4/1850 SA	Light-Beige	220 ± 20	2,0 ± 0,2	150 ± 2	PL-100%
11.	S 4/2350 S	Light-Beige	260 ± 25	2,0 ± 0,2	150 ± 2	PL-100%
12.	S 4/2350 L	Beige	260 ± 20	2,0 ± 0,2	150 ± 2	PL-100%
13.	S 4/2546 SH-80	Grey	260 ± 20	2,5 ± 0,2	150 ± 2	WO-80%, PL-20%
14.	S 4/2548 SH-80	Light-Brown	260 ± 20	2,5 ± 0,2	150 ± 2	WO-80%, PL-20%
15.	S 4/2540 BSH-80	Light	260 ± 20	2,5 ± 0,2	150 ± 2	WO-80%, PL-20%
16.	S 4/2540 BSH-60	Light	260 ± 20	2,5 ± 0,2	150 ± 2	WO-60%, PL-40%

1.3. Nappy non-woven material used for the top of the shoe (replacing the SLoth)

#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
1.	S 4/3351 L	Black	300 ± 25	2,5 ± 0,2	150 ± 2	PL-100%
2.	S 4/3452 L	Black with Graying	300 ± 25	2,5 ± 0,2	150 ± 2	PL-100%

1.4. Nonwoven material used for the inside lining of the boots (stocking of the boot)

#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
1.	S 133/4	Grey	350 ± 25	3,0 ± 0,2	154 ± 2	PL-100%
2.	S 133/6	Grey	400 ± 25	3,4 ± 0,2	153 ± 2	PL-100%
3.	S 13/6	Grey	400 ± 25	3,2 ± 0,2	168 ± 2	PL-100%
4.	S 13/6 VI	Light-Grey	400 ± 25	3,2 ± 0,2	168 ± 2	PL-100%
5.	S 13/8	Grey	500 ± 40	3,5 ± 0,2	168 ± 2	PL-100%

1.5. Nonwoven material used for making a vamp in shoes

#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
1.	S 3/1 LM	Dark-Grey	200 ± 20	1,5 ± 0,2	150 ± 2	PL-100%
2.	S 3/3 LM	Dark-Grey	260 ± 25	1,8 ± 0,2	150 ± 2	PL-100%

1.6. Nonwoven fabric for duplication with top material for textile, home and other shoes

#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
1.	S 2/1 VI	Grey	200 ± 20	1,6 ± 0,2	162 ± 2	PL-100%
2.	S 2/2 VI	Grey	240 ± 25	1,8 ± 0,2	162 ± 2	PL-100%
3.	S 2/1	Black	200 ± 20	1,6 ± 0,2	162 ± 2	PL-100%
4.	S 2/2	Black	250 ± 25	1,8 ± 0,2	162 ± 2	PL-100%
5.	S 2/1 VISH-20	Grey	200 ± 25	2,0 ± 0,2	160 ± 2	WO-20%, PL-80%
6.	S 2/1 VISH-30	Grey	200 ± 25	2,0 ± 0,2	160 ± 2	WO-30%, PL-70%
7.	S 2/1 VISH-80	Grey	200 ± 25	2,2 ± 0,2	160 ± 2	WO-80%, PL-20%
8.	S 2/2 VISH-80	Grey	250 ± 25	2,4 ± 0,2	160 ± 2	WO-80%, PL-20%
9.	S 2/2 TSH-60	Dark-Grey	250 ± 25	2,3 ± 0,2	160 ± 2	WO-60%, PL-40%
10.	S 2/2 SSH-80	Light-Brown	250 ± 25	2,4 ± 0,2	160 ± 2	WO-80%, PL-20%
11.	S 2/3 VISH-80	Grey	300 ± 25	2,6 ± 0,2	160 ± 2	WO-80%, PL-20%
12.	S 2/3 SH-50	Brown	300 ± 25	2,5 ± 0,2	160 ± 2	WO-50%, PL-50%
13.	S 3/1 LM	Dark-Grey	200 ± 20	1,5 ± 0,2	150 ± 2	PL-100%
14.	S 3/3 LM	Dark-Grey	260 ± 25	1,7 ± 0,2	153 ± 2	PL-100%
15.	S 3/3 L	Grey	300 ± 25	2,0 ± 0,2	150 ± 2	PL-100%
16.	IF-150 SMT	White	150 ± 20	1,4 ± 0,2	155 ± 2	PL-100%

1.7. Nonwoven material used for making the basic insole

#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
1.	SA 7/3 B-NP-50	White	530 ± 50	2,0 ± 0,2	140 ± 5	PL, polymer composition
2.	SA 7/3 SHL-NP-50	White	530 ± 50	2,0 ± 0,2	140 ± 5	PL, polymer composition
3.	SA 7/3 CH-NP-50	Black	530 ± 50	2,0 ± 0,2	140 ± 5	PL, polymer composition
4.	SA 7/3 VIL-NP-50	Grey	530 ± 50	2,0 ± 0,2	140 ± 5	PL, polymer composition
5.	SA 7/3 VI-NP-50	Grey	530 ± 50	2,0 ± 0,2	140 ± 5	PL, polymer composition

1.8. Nonwoven material used for making the molded insole

#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
1.	S 13/8 SL	Grey	500 ± 30	3,0 ± 0,2	153 ± 2	PL-100%
2.	S 13/9 SL	Grey	550 ± 30	3,4 ± 0,2	153 ± 2	PL-100%
3.	S 13/9 BL	White	550 ± 30	3,0 ± 0,2	153 ± 2	PL-100%
4.	S 2/9 SL	Grey	550 ± 30	3,0 ± 0,2	153 ± 2	PL-100%
5.	SP 2/3 VI-NP-100	Grey	560 ± 50	2,1 ± 0,2	150 ± 4	PL, polymer composition
6.	SP 2/3 VI-PP-100	Grey	560 ± 50	2,1 ± 0,2	150 ± 4	PL, polymer composition
7.	SP 2/6 PP-50	Black	600 ± 50	3,5 ± 0,3	150 ± 4	PL, polymer composition

1.9. Nonwoven material used for making the top insole

#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
1.	SA 2/3 NP-65	Black	490 ± 40	1,8 ± 0,2	144 ± 5	PL, polymer composition
2.	SA 2/3 NP-65	Black	550 ± 50	2,0 ± 0,2	148 ± 3	PL, polymer composition
3.	SA 2/3 SHS-NP-65	Light-Grey	460 ± 40	1,8 ± 0,2	145 ± 5	PL, polymer composition
4.	SA 2/3 SHS-NP-65	Light-Grey	460 ± 40	1,8 ± 0,2	145 ± 5	PL, polymer composition
5.	SA 2/4 VI-NP-65	Grey	520 ± 50	2,0 ± 0,2	144 ± 5	PL, polymer composition
6.	SP 2/1 PP-100	Black	400 ± 40	1,7 ± 0,2	150 ± 4	PL, polymer composition
7.	SP 2/3 PP-100	Black	600 ± 50	2,1 ± 0,2	150 ± 4	PL, polymer composition
8.	SP 2/1 VI-NP-100	Grey	400 ± 40	1,7 ± 0,2	150 ± 4	PL, polymer composition
9.	SP 2/3 VI-NP-100	Grey	560 ± 50	2,1 ± 0,2	150 ± 4	PL, polymer composition
10.	SP 2/3 VI-PP-100	Grey	560 ± 50	2,1 ± 0,2	150 ± 4	PL, polymer composition
11.	S 2/6 PP-50	Black	600 ± 50	3,5 ± 0,3	150 ± 3	PL, polymer composition
12.	S 133/6	Grey	400 ± 25	3,0 ± 0,2	150 ± 2	PL, polymer composition
12.	S 133/6	Grey	400 ± 25	3,0 ± 0,2	150 ± 2	PL-100%
13.	S 133/7 SV	Light-Grey	450 ± 30	3,2 ± 0,2	150 ± 2	PL-100%
14.	S 133/8	Grey	450 ± 30	3,8 ± 0,2	150 ± 2	PL-100%
15.	S 133/9 ZH	Grey	550 ± 30	4,0 ± 0,2	150 ± 2	PL-100%
16.	S 133/9 ZHS	Light-Grey	550 ± 30	4,0 ± 0,2	150 ± 2	PL-100%
17.	S 133/10 SL	Light-Grey	600 ± 40	3,5 ± 0,2	150 ± 2	PL-100%
18.	S 133/14	Grey	800 ± 55	6,8 ± 0,4	150 ± 2	PL-100%
19.	S 133/16	Grey	900 ± 55	7,4 ± 0,4	150 ± 2	PL-100%
20.	S 133/18	Grey	1000 ± 55	7,7 ± 0,5	152 ± 2	PL-100%
21.	S 133/20	Grey	1100 ± 50	8,0 ± 0,5	152 ± 2	PL-100%
22.	S 133/9 SSH	Light-Brown	550 ± 30	4,0 ± 0,2	150 ± 2	WO-50%, PL-50%
23.	S 133/9 SSH-20	Light-Brown	550 ± 30	4,0 ± 0,2	150 ± 2	WO-20%, PL-80%
24.	S 133/14 SH	Brown	800 ± 40	6,8 ± 0,4	150 ± 2	WO-50%, PL-50%
25.	S 133/16 SSH-10	Light-Brown	900 ± 25	7,0 ± 0,4	150 ± 2	WO-10%, PL-90%

1.10. Hard non-woven material with impregnation used for stiff shoe parts

#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
1.	SP 2/1 PP-100	Black	400 ± 40	1,7 ± 0,2	150 ± 4	PL, polymer composition
2.	SP 2/3 PP-100	Black	600 ± 50	2,1 ± 0,2	150 ± 4	PL, polymer composition
3.	SP 2/1 VI-NP-100	Grey	400 ± 40	1,7 ± 0,2	150 ± 4	PL, polymer composition
4.	SP 2/3 VI-NP-100	Grey	560 ± 50	2,1 ± 0,2	150 ± 4	PL, polymer composition
5.	SP 2/3 VI-PP-100	Grey	560 ± 50	2,1 ± 0,2	150 ± 4	PL, polymer composition

1.11. Nonwoven material used for the making of a nitrile pad in the sole of shoes

#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
#	Product code	Color	Surface density, g/cm²	Thickness, mm	Width, cm	Raw material composition
1.	S 3/4	Black	350 ± 25	1,9 ± 0,2	150 ± 2	PL-100%
2.	S 3/6	Black	400 ± 30	2,1 ± 0,2	150 ± 2	PL-100%

1. Non-woven fabric used for the production of shoes