4. Nonwoven fabric used in the sewing industry

The material with code S 2/... is a non-woven fabric, fastened with needle-punched method. The material is compacted.

The material with code S 3/... is a non-woven fabric, fastened with needle-punched method and thermobonded.

The material with code S 4/... is a non-woven nappy fabric. Material marked “A” does not have thermobonding and is more stretched, which has its advantages when tuning car interiors.

The material with code S 8/... is a non-woven fabric, fastened with needle-punched method and calendered on both sides.

The material with code S 9/... is a non-woven fabric, fastened with needle-punched method and calendered on one sides.

The material with code S 13/... is a non-woven fabric, fastened with needle-punched method.

The material with code IF... is a non-woven fabric, fastened with needle-punched method and, depending on the purpose of the material, can be additionally thermobonded.

The material with code SP... is a non-woven needle-punched fabric with a continuous impregnation of the polymer composition. The material under normal conditions is hard, when heated to 100-130° C softens and can be molded.

The material with code SA 2/..., SA 3/... is a non-woven needle-punched fabric with one-sided impregnation with the polymer composition.

The material with code SA 7/... is a nonwoven needle-punched fabric reinforced with a woven frame with a one-sided impregnation by a polymer composition.

 

4.1. For the manufacture of shoulder pads

# Product code Color Surface density, g/cm² Thickness, mm Width, cm Raw material composition
# Product code Color Surface density, g/cm² Thickness, mm Width, cm Raw material composition
1. IF 120 SMK White 120 ± 15 1,0 ± 0,2 150 ± 2 PL-100%
2. IF 150 SMK White 150 ± 15 1,1 ± 0,2 150 ± 2 PL-100%
 

4.2. For the manufacture of goods for baths and saunas

# Product code Color Surface density, g/cm² Thickness, mm Width, cm Raw material composition
# Product code Color Surface density, g/cm² Thickness, mm Width, cm Raw material composition
1. S 2/3 BSH-80 Light 300 ± 25 2,6 ± 0,2 160 ± 2 WO-80%, PL-20%
2. S 2/3 BSH-50 Light 300 ± 25 2,5 ± 0,2 160 ± 2 WO-50%, PL-50%
3. S 8/3 BSH-80 Grey 300 ± 25 2,0 ± 0,2 150 ± 2 WO-80%, PL-20%
4. S 8/3 TSH-80 Dark-Grey 300 ± 25 2,0 ± 0,2 150 ± 2 WO-80%, PL-20%
5. S 133/6 Grey 400 ± 25 3,0 ± 0,2 150 ± 2 PL-100%
6. S 133/7 SV Light-Grey 450 ± 30 3,2 ± 0,2 150 ± 2 PL-100%
7. S 133/8 Grey 500 ± 30 3,8 ± 0,2 150 ± 2 PL-100%
8. S 133/9 ZH Grey 550 ± 30 4,0 ± 0,2 150 ± 2 PL-100%
9. S 133/9 ZHS Light-Grey 550 ± 30 4,0 ± 0,2 150 ± 2 PL-100%
10. S 133/4 BSH Light 350 ± 25 2,6 ± 0,2 150 ± 2 WO-60%, PL-40%
11. S 133/9 BSH Light 350 ± 30 4,0 ± 0,2 150 ± 2 WO-50%, PL-50%
12. S 133/9 SSH Light-Brown 550 ± 30 4,0 ± 0,2 150 ± 2 WO-50%, PL-50%
13. S 133/9 SSH-20 Light-Brown 550 ± 30 4,0 ± 0,2 150 ± 2 WO-20%, PL-80%