The material with code S 2/... is a non-woven fabric, fastened with needle-punched method. The material is compacted.
The material with code S 3/... is a non-woven fabric, fastened with needle-punched method and thermobonded.
The material with code S 4/... is a non-woven nappy fabric. Material marked “A” does not have thermobonding and is more stretched, which has its advantages when tuning car interiors.
The material with code S 8/... is a non-woven fabric, fastened with needle-punched method and calendered on both sides.
The material with code S 9/... is a non-woven fabric, fastened with needle-punched method and calendered on one sides.
The material with code S 13/... is a non-woven fabric, fastened with needle-punched method.
The material with code IF... is a non-woven fabric, fastened with needle-punched method and, depending on the purpose of the material, can be additionally thermobonded.
The material with code SP... is a non-woven needle-punched fabric with a continuous impregnation of the polymer composition. The material under normal conditions is hard, when heated to 100-130° C softens and can be molded.
The material with code SA 2/..., SA 3/... is a non-woven needle-punched fabric with one-sided impregnation with the polymer composition.
The material with code SA 7/... is a nonwoven needle-punched fabric reinforced with a woven frame with a one-sided impregnation by a polymer composition.
| # | Product code | Color | Surface density, g/cm² | Thickness, mm | Width, cm | Raw material composition |
|---|---|---|---|---|---|---|
| # | Product code | Color | Surface density, g/cm² | Thickness, mm | Width, cm | Raw material composition |
| 1. | IF 150 SMK | White | 150 ± 15 | 1,1 ± 0,2 | 150 ± 2 | PL-100% |
| 2. | S 3/1 LM | Dark-Grey | 200 ± 20 | 1,5 ± 0,2 | 150 ± 2 | PL-100% |
| 3. | S 3/3 LM | Dark-Grey | 260 ± 25 | 1,8 ± 0,2 | 150 ± 2 | PL-100% |
| 4. | S 3/3 L | Grey | 300 ± 25 | 2,0 ± 0,2 | 150 ± 2 | PL-100% |
| 5. | S 3/3 BL | White | 300 ± 25 | 2,0 ± 0,2 | 150 ± 2 | PL-100% |
| 6. | S 3/4 L | Grey | 350 ± 25 | 2,1 ± 0,2 | 150 ± 2 | PL-100% |
| 7. | S 133/6 | Grey | 400 ± 25 | 3,0 ± 0,2 | 150 ± 2 | PL-100% |
| 8. | S 133/7 SV | Light-Grey | 450 ± 30 | 3,2 ± 0,2 | 150 ± 2 | PL-100% |
| 9. | S 133/8 | Grey | 500 ± 30 | 3,8 ± 0,2 | 150 ± 2 | PL-100% |
| 10. | S 133/9 ZH | Grey | 550 ± 30 | 4,0 ± 0,2 | 150 ± 2 | PL-100% |
| 11. | S 133/9 ZHS | Light-Grey | 550 ± 30 | 4,0 ± 0,2 | 150 ± 2 | PL-100% |
| 12. | SA 2/3 NP-65 | Black | 490 ± 40 | 1,8 ± 0,2 | 144 ± 5 | PL, polymer composition |
| 13. | SA 2/4 NP-65 | Black | 550 ± 50 | 2,0 ± 0,2 | 148 ± 3 | PL, polymer composition |
| 14. | SA 2/3 SHS-NP-65 | Light-Grey | 460 ± 40 | 1,8 ± 0,2 | 145 ± 5 | PL, polymer composition |
| 15. | SA 3/3 SHS-NP-65 | Light-Grey | 460 ± 40 | 1,8 ± 0,2 | 145 ± 5 | PL, polymer composition |
| 16. | SA 2/4 VI-NP-65 | Grey | 520 ± 50 | 2,0 ± 0,2 | 144 ± 5 | PL, polymer composition |
| 17. | SP 2/1 PP-100 | Black | 400 ± 40 | 1,7 ± 0,2 | 150 ± 4 | PL, polymer composition |
| 18. | SP 2/3 PP-100 | Black | 600 ± 50 | 2,1 ± 0,2 | 150 ± 4 | PL, polymer composition |
| 19. | SP 2/1 VI-NP-100 | Grey | 400 ± 40 | 1,7 ± 0,2 | 150 ± 4 | PL, polymer composition |
| 20. | SP 2/3 VI-NP-100 | Grey | 560 ± 50 | 2,1 ± 0,2 | 150 ± 4 | PL, polymer composition |
| 21. | SP 2/3 VI-PP-100 | Grey | 560 ± 50 | 2,1 ± 0,2 | 150 ± 4 | PL, polymer composition |